Silica Fiber Sleeve

• Materials: Pure silica fiber (SiO2 content≥94%)

• Working Temperature: Continuous working at 1832°F(1000°C), peaks at 3000°F (1650°C)

• Size Range: Nominal ID: 1/8” (3mm) – 4 3/4” (120mm)

Resistant to extreme heat and flame; soft and low shrinkage when being heated.

HANTAI-SILICA-FIBER-SERIES

DESCRIPTION

HANTAI® Silica Fiber Sleeve protects hose, cables, tubes and wires from hazards of extreme high heat, frame and molten splashes. Braided from pure silica fiber (SiO2 content ≥94%), it is able to withstand continuous use at 1832°F(1000°C) and short-term exposure up to 3000°F(1650°C), while remains minimum lineal shrinkage under extreme heat conditions. Resistant to common chemicals and solvents, this high temperature silica sleeve can be cut easily with scissors and expands to allow effortless installation. It is ideal for protection of delicate components and personnel from exposure to high temperature exhaust systems and pipes.

CHARACTERISTICS

  PRODUCT Silica Fiber Sleeve / Alternative to Silicaflex Firesleeve
  HANTAI PART NO# HT31-** (** refers to the inner diamter=ID)
  MATERIALS Pure silica fiber (SiO2 content≥94%)
  CONSTRUCTION Braided
  SIZE RANGE Nominal ID: 1/8” (3mm) – 4 3/4” (120mm)
  WORKING TEMPERATURE Continuous working at 1832°F(1000°C), peaks at 3000°F (1650°C)
  COLOR Nature
  ROLL LENGTH 30.5 meters / roll
  AVAILABLE OPTIONS Special bulk packaging (maximize productivity/minimize waste) Pre-cut short length
  TYPICAL INDUSTRIES Hose Fabrication, Oil & Gas, Iron & Steel, Glass, Vehicles, etc.

 

Scroll to Top
Scroll to Top