Blog Post

Glassfiber composite materials of the top ten applications

Glassfiber is a kind of inorganic nonmetallic material with excellent performance. It has many advantages, such as good insulation, heat resistance, good corrosion resistance and high mechanical strength, but its shortcoming is brittle and its abrasion resistance is poor. It is glass ball or waste glass as raw materials by high temperature melting, drawing, winding, weaving and other technology into the system, the monofilament diameter of several microns to twenty meters a micron, the equivalent of a hair Of the 1 / 20-1 / 5, each fiber bundle of raw silk by hundreds or even thousands of monofilaments. Glass fiber is usually used as composite materials in the reinforced materials, electrical insulation materials and thermal insulation materials, circuit boards and other areas of the national economy.

First, the boat
Glass fiber composite material has the characteristics of corrosion resistance, light weight, excellent enhancement effect, and is widely used in the manufacture of yacht hull, deck and so on.

Second, electronic and electrical
Glass fiber reinforced composite materials in the use of electrical and electronic aspects of the main use of its electrical insulation, anti-corrosion characteristics. Composite materials in the field of electrical and electronic applications have the following main parts: 1, electrical enclosures: including electrical switch boxes, electrical wiring boxes, instrument panel cover and so on. 2, the original electrical and electrical components: such as insulators, insulation tools, motor cover and so on. 3, the transmission line, including composite cable bracket, cable trench bracket and so on.

Third, the wind energy
Wind energy is a pollution-free, sustainable energy, the use of wind power is a way to develop new energy sources. Glass fiber has excellent reinforcement effect, light weight and other characteristics, is used in the manufacture of glass fiber reinforced plastic blades and the cover of a good material.

Four, aerospace, military and national defense
Due to the special requirements of materials in aerospace and military fields, the lightweight, high strength, impact resistance and flame retardant properties of glass fiber composite materials can provide a wide range of solutions for these fields. Composite materials in these areas are as follows:
– Small aircraft fuselage
– Helicopter shells and rotor blades
– Aircraft minor structural components (floors, doors, seats, auxiliary fuel tanks)
Aircraft engine parts
– Helmet
– Radome
– Rescue stretcher

Chemical Chemistry
Glass fiber composite giants have good corrosion resistance and excellent reinforcement effect. They are widely used in chemical industry, such as chemical container (such as storage tank), anticorrosive grille and so on.

Sixth, infrastructure
Glass fiber has good size, enhanced performance, and steel, concrete and other materials compared to giants light weight, corrosion resistance and other characteristics, making glass fiber reinforced materials to create a bridge, wharf, highway pavement, trestle, water buildings, piping And other infrastructure ideal material.

Construction
Glass fiber composite material has the characteristics of high strength, light weight, anti-aging, fire-retardant properties, noise insulation, can be widely used in the manufacture of a variety of building materials, such as: reinforced concrete, composite wall, insulation screens and decoration , FRP reinforced, bathroom, swimming pool, ceiling, lighting panels, FRP tile, door panels, cooling towers and so on.

Eight, the car
As the composite material in toughness, corrosion resistance, wear resistance and temperature resistance, etc. compared with the traditional material has obvious advantages, and to meet the requirements of light and high strength means of transport, its application in the automotive field more and more widely. Typical applications are:
– Car front and rear bumper, fender, engine cover, truck roof – car dashboard, seats, cockpit, decoration – automotive electrical and electronic components

CONSUMER GOODS AND COMMERCIAL FACILITIES
Compared with the traditional materials such as aluminum and steel, glass fiber reinforced materials corrosion resistance, light weight, high strength characteristics to the composite material to bring better performance, lighter weight and other effects. The application of composite materials in this field includes:
– Industrial gears
– Industrial, civilian pressure bottle
– Laptop, mobile phone shell
– Parts of household appliances

10, sports and leisure
The composite material has the characteristics of light weight, high strength, large degree of freedom of design, easy molding, low friction coefficient and good fatigue resistance, and is widely used in sports equipment. Typical applications are:
–Ski board
– tennis rackets, badminton rackets
– Rowing
–bicycle
– Motorboat

 

Related Posts

silica fabric
Typical Applications of High Silica Fabric

High silica fabric is a heat-resistant, soft special crystal fiber fabric, the SiO2 content…

Basalt Fiber Tape
Basalt Tape

HANTAI Basalt  Tape is braided by basalt fiber which has outstanding property of electric insulation,…

PBO knitted sleeve
PBO Knitted Sleeve

HANTAI PBO knitted Sleeve by PBO fiber, which is a kind of extremely high…

kevlar knitted sleeve
Kevlar knitted sleeve

HANTAI Kevlar knitted sleeve  by 100% aramid fiber. It will not burn and will…

pure silica sleeve
Pure Silica Fabric

HANTAI Pure Silica  Fabric is made from high quality silica fiber yarns, SiO2 content:…

PBO Knitted Sleeve
PBO Knitted Sleeve Introduction

PBO knitted sleeve made of PBO composite organic fibers, has good heat resistance and…

fire sleeve
The development prospect of high temperature resistant bushing

Synthesis of special high temperature resistant materials determines the high temperature tube has many…

E-grade Fiberglass Sleeve
Glass fiber products are widely used in the future market

One, glass fiber products with excellent performance, wide range of uses
Glass fiber products have…

fire sleeve
Basketball Friendship Match

The afternoon of September 23rd: 16: 00, sponsored by the Chinese HANTAI company of…

Braided Kevlar Aramid Sleeve
Braided Kevlar Aramid Sleeve

HANTAI high temperature and heat resistant Kevlar aramid sleeve is fabricated from high quality…

firesleeve-33
Practicability of high temperature resistant cable protective sleeve

Resistance to high temperature cable protection sleeve is mainly used in electric power, chemical…

hantai
Hantai always contributes to the community

With the developing enterprise, innovating technological,  Anhui Ningguo Hantai New Materials Limited Company always contributes to…

WeChat official account
The WeChat official account of Anhui Ningguo Hantai New Materials Limited Company launched

Currently, the market is increasingly competitive, living space of minor enterprise getting smaller and smaller….

Cherish the environment
Cherish the environment and create green

Cherish the environment is to reduce consumption of resources, but also nourish and nurture the nature. We…

E-grade Fiberglass Sleeve
The features of fiberglass sleeve

Fiberglass sleeve is woven with E-glass fiber in a special process. It has excellent ductility, and…

Fire Sleeve
Carbon fiber tape

Carbon fiber tape, ribbon made of carbon fiber, referred to as carbon belt. Has…

IMG_7171
HanTai Lab

Han Tai experimental middle school has a full range of high temperature protection products…

fire sleeve
2016 Asia first, the world’s Second International Plastics and Rubber Exhibition

Warm congratulations on the new materials Co., Ltd. our company Anhui Hantai invited to…

lvbobolixianweibu3
Features of high-temperature fabric

1.High temperature fabric is used between -196 ℃ and 300 ℃,with a weather resistant, anti-aging….

13
The advantages of Firesleeve with Velcro

We know that in some of the metallurgical enterprises of high-temperature region cables, piping,…

High Temperature Fire Sleeve
Applications of fire sleeve

1.Safety and environmental protection, protection of workers’ health
E-glass fiber itself has an exceptionally strong…

Hantai Silica Fiberglass needled Mat used on the Automobile
Hantai Silica Fiberglass needled Mat used on the Automobile

Hantai Silica Fiberglass Needled Mat is made from silica fiberglass fiber. It has properties…

12月展会
Shanghai Exhibition 2015

HanTai Fire sleeve, high temperature flame retardant tape and Sealing components can be sued…

Silicone Fiberglass Sleeve
Glass fiber and composite materials in the communications industry shine

As the field of industrial textiles focus branch, glass fiber and composite material with…

The Status of the composites industry in 2015

Chinese composites market in 2009 after experiencing the biggest problem is still more than…

Solstice LBA
Japan to accelerate application of fireproof materials in the construction industry

November 5, 2015, Honeywell (NYSE: HON) announced that Japan has more than 80 buildings…

news2
Hantai new materials will participate in PTC

PTC CHINA exhibition is sponsored by the State Administration of Machinery Industry, China Hydraulics…

Fire Blanket
Protective effect of high temperature insulation blanket automobile engine compartment

Protection of the engine compartment is also known as noise cotton cotton or Fire…

Kiln temperature insulation coating high performance and wide application
Kiln temperature insulation coating high performance and wide application

In building materials, metallurgy, chemical industry, environmental protection, medicine and many other production industries,…